Engineering

Research & Development

Decades, Not Hours

Proving the Machine Before It’s Built

Anyone can build a machine that runs for a few hours. Building one that runs for decades is a different problem, and it has to be solved before the first piece of steel is cut.

LMC‘s World Class R&D team simulates machines under years of operating load, tests unfamiliar products on real equipment in our lab, and feeds everything learned back into the designs we build. The result is equipment whose service life was a design decision rather than a hope.

FULL MACHINE SIMULATION

Failure Found Before Fabrication

Before a product family goes into production, and again before significant updates, the LMC R&D team puts the design through a full range of advanced simulations and lab testing. Finite element analysis (FEA) shows where the structure flexes and fatigue accumulates, so failures are identified in the model instead of in your facility. Computational fluid dynamics (CFD) is used to model how air moves through relevant aspiration and dust collection. Discrete element models (DEM) are used to simulate how the product will actually behave on the equipment.

Running these advanced simulations before fabrication ensures that high risk areas are addressed while the machine is still in the design stage. It also means the options offered on each product family are not just variations — they are configurations backed by years of field experience, advanced simulations, and lab testing.

6020 Shear Roll

NOTHING GETS WRITTEN OFF

Every Machine Informs the Next

A design is never finished at LMC. Field data, simulation results, and lab testing all feed back into the product families that we build.

When a machine does not perform the way it was intended to perform, R&D investigates the root cause rather than treating it as a one-off. We provide you with a solution, and our Product Design team gets the data, so the correction is built into every machine that follows. Any machine purchased from LMC carries the accumulated lessons of each machine that came before it.

Thumbnail image for a video about LMC Aspirators

SEND US YOUR PRODUCT

Your Product, Tested

When a product mixture is unique or has a specific problem, we don’t guess at the best process. Send us a sample, and our lab will run it across the full line of LMC equipment to determine what works.

Our lab has several thousand square feet of working, full-sized production equipment. We do not use scaled down models. When a test calls for something the lab doesn’t have, we build it. Using real production machines ensures consistency between the results of the lab testing and outcome in your future process.

Your sample is sent back after testing. This allows you to inspect the results yourself rather than reading about them, and you decide how the process performed. Customers are also always welcome to visit the lab and watch the testing in person.

Product testing is arranged project by project. Talk to us about your separation needs, and we will arrange a test.

What’s New at LMC?

Technology in Development

R&D is also engineers what doesn’t yet exist — new controls, larger-capacity equipment, and new approaches to gentle separation. Some of our latest innovations can be seen below:

Marc 700 Accumulator

The Marc 700 Accumulator is the largest accumulator that LMC has ever built. Sporting 40% more capacity than the Marc 500 Accumulator, this machine is perfect for high-throughput lines where floorspace is costly.

Advanced Controls

The gravity separator, destoner, and accumulator have always been manual machines. Our R&D lab has brought smart electronic controls to all three, letting an operator save a set of operating conditions and recall it easily. The operator can also adjust deck inclination, eccentric shaft speed, or fan speed at the touch of a screen. The machine’s operating parameters are always shown, so someone walking through the process can see what the machine is doing without stopping to check it manually.

120″ Shaker

The 10′ shaker boasts 43% more capacity than our 84″ model. Designed over the course of a full year, this machine has been thoroughly simulated and tested to ensure fantastic performance. Currently designed as a D model, this shaker can be ordered in any of the standard LMC shaker configurations.

ADVANCED RESEARCH & DEVELOPMENT

Bring Us Something We Haven’t Seen

If you’re working with a product that presents a unique challenge, the fastest way to find out what works is to run it. Send us a sample, or come to Donalsonville and watch it yourself.

Consent(Required)